Please choose the country
You will be directed to your specific country page
Three decades of innovations in healthcare now brought into stretcher in three key areas.
Sprint 200 was designed to minimize push forces and optimize patient transport.
Thanks to i-Drive Power® Sprint 200 requires only a touch of a button to drive.
Option without motorization requires 77% less than recommended initial push force.1
Constant ergonomic posture thanks to innovative IV&Drive® concept.
EasyBrake® ensures ergonomic braking from all four sides.
1 White paper: Best practice for patient transport in Sprint 200 for reducing WRMSDs. Own testing, data upon request.
Sprint 200 provides support when patient exits the stretcher and strong siderails secure the patient.
Many falls happen when patient tries to leave the stretcher unsupported, Mobi-Lift handle help the patient during bed exit.
Bed exit feature is integrated into scales and notifies the caregivers when patient leaves the stretcher.
Secure siderails cover 70% of the patient body while still providing access for the caregivers.
Sprint 200 is easy and intuitive to use and helps caregivers in their daily tasks.
Thanks to scales with the precision of 0.5 kg and battery back-up, caregivers do not need to move patient to another surface for weighting.
Siderails can be lowered so there is zero transfer gap between the stretcher and another surface for lateral patient transport
Hydraulic controls are reliable and easy to use under any circumstances.
Sprint 200 is built from high quality materials that ensure high durability.
5x more than recommended force resistance of IV poles.1
2.2x more than recommended force resistance of siderails.2
Seamless design of columns, mattress platform and undercarriage makes the stretcher easy to clean.
1 White paper: Best practice for patient transport in Sprint 200 for reducing WRMSDs. Own testing, data upon request.
2 White paper: Can plastic Sprint 200 siderails surpass steel? Own testing, data upon request.
Sprint 200 supports multiple positions to help the patient with recovery
Positions include Cardiac chair, Trendelenburg, Reverse Trendelenburd, Vascular leg or Semi-Fowler
Thanks to Ergoframe® feature, the peak pressure in pelvic area is reduced by 16%3
Ergoframe® also helps with sliding down prevention.
3 White paper: Enhanced features for decreasing risk of developing PI in Sprint 200. Own testing, data upon request.
Sprint 200 can be equipped with a variety of mattresses based on the condition of the patient
Reactive mattress redistributes the pressure in any position for partially mobile patients.
Advanced mattress provides comfort and pressure redistribution for mobile patients.
Standard and Comfort mattresses can be used for shorter stays.
Large mattress platform can fit patients of most sizes without any accessories.
Unique Mobi-Grips feature can help the patient with self-mobilization
| External Dimensions in Standard Bed Position (length x width) | 216 cm x 89 cm |
| Siderail Height above Mattress support platform | 40,4 cm |
| Siderail Length | 137,4 cm |
| Maximum Mattress Height | 13 cm |
| Minimum-Maximum Mattress support platform Height above floor (without Mattress) | 53 cm - 86 cm |
| Castor Diameter | 20 cm |
| Maximum Backrest Angle | 90° |
| Maximum Thighrest Angle | 40° |
| Maximum Calfrest Angle | 25° |
| Trendelenburg Angle | 17° |
| Antitrendelenburg Angle | 17° |
| Safe Working Load (SWL) | 320 kg |
| Average Stretcher Weight | 167 kg |
| Maximum Patient Weight | 280 kg |
|
|
Instructions for Use - Sprint 200, Sprint 200 mattresses
|
